Aluminum:

Part Number: 610165

Description: Aluminum Driveshaft; 150MPH Max

Fitment: 08-14 Subaru STI Hatchback & Sedan

Details:

The 1-piece driveshaft for the Subaru is a complete 6061-T6 3″ aluminum shaft that is approximately 1/2 the weight of the factory 2-piece driveshaft. The 1-piece aluminum shaft features larger, replaceable and greaseable u-joints and can handle about 650WHP and 155 MPH. By removing the factory 2-piece shaft and installing a single shaft the car will feel more responsive due to the lighter weight of the shaft and also the fact that the hanger bearing is not moving up and down during acceleration. Available for most popular motor/trans combinations, if you don’t see yours listed, custom shafts are also available.

Differential flange mounting holes must be drilled to accept 10mm bolts

PART# SUSH9

Carbon Fiber: 

Part Number: 610166

Description: Carbon Fiber Driveshaft; 180MPH Max

Fitment: 08-14 Subaru STI Hatchback & Sedan

Details:

The 1-piece driveshaft for the Subaru WRX Sti is a complete 2.75″ Carbon Fiber shaft that is approximately 1/2 the weight of the factory 2-piece driveshaft. The 1-piece carbon shaft features larger, replaceable u-joints and can handle about 850WHP and 180 MPH. We had the tubing custom wound with a high modulus fiber to ensure the strength while making it small enough to clear everything under the car. All of the factory shields, plates and covers can be used without any alteration to the car at all. Not only will the car feel more responsive but it will also make a noticeable difference on the noise level in the car.

Factory Differential flange must be drilled to accept 10mm bolts (included)

PART# SUSH9-C