Part Number: SKAFC-AUB00

Description: Tein S Tech Lowering Springs

Fitment: 21+ Acura TLX (FWD/AWD/TYPE-S) 2.0T & 3.0T

Details:

Tein S.Tech Lowering springs offer approximately a 1.5-inch drop (depending on the application) for a more aggressive appearance and increased road-holding capability. Each application is road tested in North America for the proper balance between performance and comfort. Comes with a 1-year limited warranty, the spring length is guaranteed not to sag more than 5mm, and be clear of any manufacturer defects.

Tein S.Tech springs are Tein's more aggressive lowering spring line, designed to be used with sport OEM Replacement dampers. They work best with Tein Endurara Pro, Endurapro Plus, and Koni Yellow shocks and struts. The ride is sportier than stock but not race-firm. These springs are very usable on the street, however, it is not recommended that they be used with stock dampers long-term, as they will cause accelerated wear on the factory dampers.

These springs are used with the original upper mounts and included instructions will outline any modifications that may be needed with the original OEM parts or trimming to the bump stops.

With any lowering, some increased camber change should be expected; increased negative camber can be a benefit to high-speed cornering grip. These springs will not specifically require camber kits to be added but most customers will prefer to adjust the camber after installing these springs. Each platform will have its own general camber kit needs, you may want to contact Heeltoe for advice on your specific application.

Features:

• Chrome Vanadium SAE9254V Construction

• Progressive Spring Rate Design

• Includes Silencer Rubber on certain applications

• Green Powder Coat Finish

• Developed to be used in conjunction with OEM dampers

• 1-year Manufacturers Defect and Sag Warranty*

*Covers over 5mm sag, breakage, deformity, and noise. Does not cover powder coat finish and rusting.


Kit Includes:

• Lower Springs × 4

• Some applications include TEIN Silencer Rubbers

• Warranty Information and Bump Stop Reference Guide

• Stickers*

The lowering rating on these coils depends on the model:

• On the Type-S is -1.2" down in the front and 1.0" down in the rear. That's our Tiger Eye Pearl car in the photos!

• On the SH-AWD Tech & A-Spec expect around 1.0" down all around. The silver car in the pics is a Tech AWD owned by customer Todd L. Car is equipped with a rear spare and wheel spacers.

• On FWD models expect around 1.0" In the front and a little less in the rear due to the lighter rear end of those models.