Part Number: 20-0840 (Dual Catch Can) / 20-0838 (PCV Catch Can) / 20-0839 (CCV Catch Can)

Description: Oil Catch Can

Fitment: 16+ Toyota Tacoma 3.5L

Details:

Keep the engine running smooth with Radium Engineering's new Dual Catch Can Kit, now available for the 2016–2021 Toyota Tacoma at Turn 14 Distribution! Radium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. These kits mount using factory holes and integrate perfectly with the surrounding components. They do NOT vent to atmosphere (VTA), thus are emissions and track legal. Closed loop systems remove the oil and sludge from the PCV gasses before it is routed to the engine to be burned. A closed loop system also promotes negative crankcase pressure for optimal performance. Furthermore, closed systems prevent unwanted oil vapors from entering the cabin. The dipsticks built into the catch cans allow easy inspection of accumulated fluid. No cutting, drilling or permanent modifications are required.

The PCV catch can kit runs inline between the PCV valve and the intake pipe. It mounts to threaded bosses in the engine bay on the inner fender. The PCV catch can traps unwanted "metered" crankcase vapor, unspent fuel, and oil sludge. It promotes clean filtered air back into the intake manifold. The CCV catch can mounts to threaded bosses in the engine bay on the inner fender with the provided supplementary bracket. To retain factory functionality, the CCV catch can runs inline between the crankcase vent (CCV) port and the intake pipe. At low loads, it experiences atmospheric pressure. However, when the engine is at high load (WOT), the line will experience high flow from the crankcase into the intake system. This would normally lead to oil and sludge accumulation in the air filter intake pipe. The CCV catch can captures this and promotes clean filtered air back into the intake.

Features:

• Baffled catch cans with dipsticks

• Tacoma specific mounting bracket

• 10AN adapter fittings and hose ends